DIY GLASS SPLASHBACKS
DIY Standard Sizes = Highly Cost Effective
Our DIY glass splashbacks offer all the sleek, stylish & ultra modern qualities with the added bonus of being a highly cost effective option. If you pride yourself on being a bit of a handy person are are up for the DIY challenge you can create the WOW factor for any space for a fraction of the cost and these splashbacks will be couriered to your door NATIONWIDE.
Our DIY splashbacks come in two standard sizes which we carry in stock:
600mm X 750mm
900mm X 750mm
The DIY splashbacks are a supply only option and can be supplied with any colours or textures from our standard sample ranges or a digital images of your choice. If you are still completely stuck on colours we can match to the Resene or Deluxe paint charts aswell.
We do have a selection of images that you are able to choose from but if you have your own image in mind we are more than happy to help you create your own personalised splashback.
When choosing an image it's important to think about image proportion and aspect ratio. Put simply this means not trying to print a landscape image on a portrait size.
If you don’t have your own image, we suggest visiting shutterstock.com, you will find plenty of images on this site which can be downloaded legally and most are suitable for large format printing. If you find an image you like take note of the ID number and email through to us
We are happy for you to supply your own images for glass splashbacks. We recommend images be sent as JPG files and at least 4500x3000 in pixels and 300dpi. This size and resolution should be suitable for splashbacks up to 1250x2500mm. However, lower file sizes maybe suitable for smaller splashbacks.
Our splashbacks are all 5mm toughened safety glass and are fit for purpose behind electric or gas cooking hobs
With these DIY options the sizes cannot be altered
Glass is supplied as one panel so minimises the joins where grease and grime can gather
We can supply the silicone (if requested) & fitting instructions with the DIY splashbacks
Supply only splashbacks can be couriered to your door, nationwide
Please note, images downloaded from Google Images or from website galleries are not suitable for digital printing on splashbacks. These images are poor quality and have low resolution. They are likely to come with copyright protection as well.
We recommend for Gas Cooking Appliances, as noted in the New Zealand Standards Authority report NZS 5261:2003 – any combustible material (Gypsum based wall board) within 200mm from the middle of the rear burner needs to be protected by either: 5mm ceramic tiles, 5mm toughened glass or 0.4mm stainless steel, or any other system that can be demonstrated to satisfy the temperature requirement.